Hydrodynamic design with integral 20 gpm flow control
- Details
14 1/2″ H x 22″ W x 10 1/2″ D | FDA approved high-density green polyethylene 9 gal tank | Unit must be wall hung | Wide-fill opening with threaded cap
- Details
Eyewash streams provide Zero Vertical Velocityé stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching | Also features a stainless steel push flag for eyewash activation, stainless steel pull rod for shower activation, a round 11″ (27.9 cm) stainless steel bowl, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability | Schedule 40 1-1/4″ hot-dipped galvanized steel piping with green corrosion resistant epoxy coating protects for years of service. Supply and Waste: 1-1/4″ NPT
- Details
A Dust cover allows the 7612 to stay protected from debris when not in use | Eyewash streams provide Zero Vertical Velocityé stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | Requires minimal maintenance and is equipped with test card to record weekly testing | Side mount design allows the unit to be mounted from the right side of the sink | ANSI Z358.1 tempering compliance options | Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
- Details
Brightly flashing amber light and 90 db buzzer brings immediate attention to an emergency situation | Switch will activate at 2.4 gpm (9.1 L) | Voltage: 120 VAC, 50 or 60 cycles. Supply: 1-1/4″ NPT | This alarm contains a multiple set of contacts for remote activation alarm sites | Model 9001 is CSA electrical certified, TYPE 4. (Nema 4 equivalent) | TYPE 4X is also available. Contact Haws for additional information.
- Details
Eyewash streams provide Zero Vertical Velocityé stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching | Also features a stainless steel push flag for eyewash activation, a round 11″ (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability | Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ NPT | ANSI Z358.1 tempering compliance options
- Details
Inverted directional flow design | Laminar flow and integral flow control
- Details
Low profile design accommodates wheelchair access | Eyewash streams provide Zero Vertical Velocityé stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements | ANSI Z358.1 tempering compliance options
- Details
Eyewash streams provide Zero Vertical Velocityé stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching | Barrier-free design offers a low profile loop assembly allowing for better wheel chair access as well as a longer pull rod for shower activation | Also features a stainless steel push flag for eyewash activation, a round 11″ (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, and ball valves with stainless steel ball and stem for durability | Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ NPT | ANSI Z358.1 tempering compliance options
- Details
Dust cover allows for the 7611 to stay protected from debris when not in use | Eyewash streams provide Zero Vertical Velocityé stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | Requires minimal maintenance and is equipped with test card to record weekly testing | Side mount design allows the unit to be mounted from either side of the sink to better fit numerous locations | ANSI Z358.1 tempering compliance options | Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
- Details
Unit can be deck or wall mounted with easy change-over instructions | Extended-length pull down arms are designed to accommodate wheelchair access | Eye/face wash streams provide Zero Vertical Velocityé stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | Dust cover allows for the 7610 to stay protected from debris when not in use | Activation and deactivation occur at a 30 degree angle from horizontal limiting splash of water onto counter or wall | Rear mount design allows the sink to remain open to other uses | ANSI Z358.1 tempering compliance options
- Details
Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness | Thermostatic shutoff that will protect the user from water over 100 F (37.8 C) by shutting off the eyewash | Supplied with a standard 55/64-27 female connection. Have a different size? Haws has that covered also with 4 other of the most commonly used faucet adapters including a 15/16-27 male, 13/16-27 male, 3/8-18 male and 13/16-24 female, to accommodate most home, commercial and lab faucet applications | Also supplied is a 1 gpm (3.8 L) laminar flow faucet outlet for hospitals or anywhere a precise flow pattern is a must | Dim; Diameter 3.5 in. (8.9 cm), height (from top to faucet outlet) 2 in. (5 cm)